2. WARRANTY POLICY
The warranty on Ikon products is only valid to the original purchaser of the kite from one of our
official retailer or through Ikon website.
The warranty is valid for twelve months from the date of purchase of the original product,
excluding kite flying lines and bridle system.
The warranty is only valid, when the product was registered online at www.ikon-kiteboarding.com
in the product section within 30 days of purchase.
A warranty claim has to be filled. The warranty form can be downloaded on the website. Ikon's
responsibility is limited to repair or replacement of the defective product and/or components.
Neither Ikon nor any of its retailers will not be responsible for any, losses or damages incurred
as a result of loss or use of product.
The warranty does not cover the following claims conditions:
- Normal wear and tear is not covered. The products will be used in tough conditions and all
gear does wear with use so if you ride a lot and your gear wears out then we consider that
normal wear. You need to maintain and check the flying lines and depower ropes as they do
wear with time and need replacement.
- All the damages due to using in not IKON recommended wind chart.
- All the damages due to fly with IKON kite.
- All the damages due to the kites due to line breaking
- All the damages caused by impact with any materials or objects as a result of prior
damages.
- All the damages caused by collisions, abuse, misuse or accidental damage.
- All the damages caused by transport, loading, unloading, droping, or out of water handling.
- All the damages caused by non-recreational use.
- All the damages caused by inappropriate storage or handling.
- All the damages caused by heat of the sun or really cold weather.
- All the damages caused by naturals events such as floods, earthquake, fire, etc.…
- All the damages caused by alterations or modifications.
- All the damages caused by repairs.
- All the damages caused by usage of the kite after the claim is reported.
- Any damage expects manufacturing defects in material or workmanship.
Download the warranty form on our website and send it to us : support@ikon-kiteboarding.com
Possible faults or delays in repairs give the purchaser no right of compensation for damages or
warranty extension.
Transport costs are at purchasers cost as well as costs resulting from the inspection he/she
has applied and accepted by IKON Kiteboarding.
IKON Kiteboarding expressly disclaims any implied warranties of merchantability of fitness for a
particular purpose and disclaims any and all responsibility and liability for consequential and
incidental damage or any other losses arising from the use of these parts, products and/or
components.
3. BAR PRESENTATION
The CONVERT BAR 2 comes in only one size 45cm wide. Our R&D department focused on the
shape of the kite to use a unique bar length.
Reduced bar diametre, new grip, soft EVA molded bar ends, new push away quick release,
mounted with flying line #8770 – 400kg from COUSIN, the bar has been tested in hard
conditions to make sure each component is durable and work perfectly within the control
system.
The CONVERT BAR 2 comes as a 4 line bar with the safety on one front line. It’s easy to make
the safety work on both front lines (for the PEAK 2 only).
The 5th line kite comes within the bar bag to set the BLIND 2 to full wakestyle mode.
3.1 Features
06
07
FRONT LINE ADJUSTMENT
CLAMCLEAT TRIM
STAINLESS STEEL BAR CENTER
SOFT EVA MOLDED BAR ENDS
BACK LINE - PRE LINE WITH PU TUBE
METAL PULLEY
REMOVABLE LOCKING TUBE
NEW PUSH AWAY QUICK RELEASE
