8.
If your appliance came complete with an IKON Air
Switch, install the control button in your sink top by
using a 33mm chassis punch to punch a hole in the
stainless steel. Place the top of the chrome plated
switch through the hole and hand tighten the nut.
9.
Connect the supplied air hose to the base of the
chrome button and attach the other end to the white
fitting on the control box.
Secure the control box to the wall of your kitchen
cabinet using the screw holes provided. The control
box should be mounted as high as possible inside
the cupboard to eliminate any possibility of water
entering the unit in case of a flood or leak.
10.
Plug the power cord into the power outlet and turn
on. You are now ready to use your new waste
disposal!
If your unit was not purchased with an Air Switch, OR the Air
Switch was purchased separately, please contact an electrician
to finish the installation of your appliance.
6
