background image

-6-

Ø 3 mm 

WARNING : During drilling the hanging holes , please pay attention to the diameter of the 

holes to be used for hanging the hood. 

If the diameters of hanging holes are not as pointed , the hood can not be assembled  properly.

Installation of the aluminum duct 

Connect one end of the aluminum vent to the previously 

mounted plastic vent. 

Connect the other end of the aluminum vent to kitchen 

chimney.  Make  sure  that  said  two  connection  are  not 

disconnected under maximum hood speed (Figure 4). 

Figure 4

Drilling suspension holes 

For Model 1170 - 1171- -1173 / 60

By using a Ø3mm driller, drill points marked as A, B, C, D 

in mounting scheme. 

For Model 1170 - 1171 - 1173 / 90

By using a Ø3mm driller, drill points marked as A, B, C, D, 

E, F in mounting scheme. 

For Model 1172 - 60

By using a Ø3mm driller, drill points marked as A, B, C, 

D,E,F in mounting scheme.

For Model 1172 - 90

By using a Ø3mm driller, drill points marked as A, B, C, 

D,E,F,G,H in mounting scheme.

Mounting into cabinet 

Place the hood into the cabinet (Picture 5). 

Align  holes  drilled  according  to  mounting  scheme  and 

holes on the product panel, and fix the product. 

 (Figure 6). 

Mounting

holes 

MAINTENANCE

*Disconnect electricity connection before maintenance and 
cleaning process.
*Aluminum cassette filter holds the dust and the oil in the air.
*Metal filter should be washed once in a month with hot and 
soaped water or, if possible, at dishwasher (60C).
*Take  off  aluminum  cassette  filter  pressing  on  springy 
latches on end point. After cleaning, do not replace before it 
dries.
*Outer surface of the cooker hood should be wiped with a 
wet cloth that is wetted with water or alcohol.
*Please  avoid  contact  of  electronic  parts  with  water  or 
similar materials.
*Using Inox cleaning and maintenance products available in 
the market will help your product to perform longer.

Warning: 

Aluminum  filters  may  be  washed  in  the 

dishwasher.  Color  of  aluminum  filters  may  change  after 
several washings. This is normal and it is not necessary to 
change the filters.

Efficient Ventilation

In order to ensure correct ventilation, keep your kitchen windows closed.

 IMPORTANT NOTE

Please pay attention when the product is operated at the same time with a product which operates 
using air and fuel (for instance; heater, water heater etc. which operates using gas, diesel fuel, 
coal or wood), since cooker hood may affect burning negatively as it directs the air out.

This warning is not valid for usage without chimney.

Washable Aluminum 

Cassette Filter  

-11-

Summary of Contents for IK40














Reviews: