background image

-3-

*Before you take pot, fry-pan etc. from the 
hob, put their lids on. 
*Do not leave hot oil on the hob. Pots that 
have hot oil in them may cause selfignition.
*Pay attention to curtains and covers during 
cooking of meals like frying because oil may 
flare up.
*Make  sure  that  filters  are  changed  in 
convenience. Filters that are not changed at 
appropriate time has risk of causing fire due 
to oil that will be gathered on them.
*Do not use filter materials that are not flame 
resistant instead of filter.
*Do  not  operate  your  product  without 
aluminum filter; do not remove filters when 
the product is on.
*In case of flame, cut power of the product 
and the cooking appliances. (Cut power of 
the product by plugging it off the socket).
*Your product may cause fire risk if cleaning 
is not applied periodically.
*Cut  power  of  the  product  before 
maintenance  process.  (Cut  power  of  the 
device by unplugging it)
*When  chimney  hood  and  the  appliances 
working  with  energy  other  than  electricity 
are  operated  at  the  same  time,  negative 
pressure  in  the  room  should  not  be  more 
than 4 Pa (4 x 10 bar)
*If there is an appliance working with fuel or 
gaseous  fuel  at  the  same  place  with  your 
hood,  this  appliance's  exhaust  should  be 
isolated  from  its  volume  totally  and  the 
appliance should be hermetic type.
*When  chimney  connection  is  applied  to 
your  product,  use  ducts  of  150mm  or 
120mm  diameter.  Duct  connection  should 
be as short as possible and should include 
few bends.

*This  product  is  designed  for  usage  at 
home.
*Your  products  usage  voltage  is  220-240 
Volts~50Hz
*Grounded plug is used at your product's 
electric  network  cable.  This  cable  should 
definitely be plugged in a grounded socket.
*All electrical networks should be set by a 
qualified electrician.
*Installation  applied  by  unauthorized 
people may cause the product to operate at 
low  performance,  damage  of  the  product 
and accidents.
*Power supply cable should not be exposed 
to press or smash during montage. Network 
cordon  should  not  be  placed  near  the 
cookers; it may cause fire if it melts.
*Do  not  plug  into  the  socket  before 
installation of the product is completed. 
*Keep the plug at a reachable place so that 
you can unplug it in case of any danger.
*Do not touch the lamps when they are on 
for long time. Lamps may hurt your hand as 
they will be hot.
*Kitchen  cooker  hoods  are  designed  for 
usage  during  normal  and  home-style 
cooking.  If  it  is  used  for  other  purposes, 
failure  risk  occurs  and  it  will  be  out  of 
warranty.
*Follow applicable rules and directions for 
passing out outlet air. (This warning is not 
valid for usage without chimney.) 
*Flaming foods should not be cooked under 
the product.
*Start your product after you put pot, fry-pan 
etc.  on  the  hob.  Otherwise  high 
temperature may cause some parts of your 
product to get deformed. 

-5

WARNINGS AND SAFETY PRECAUTIONS

Summary of Contents for IK40














Reviews: