-8-
Carbon Filter Usage
The product you use has 2 different carbon filter usage feature.Usage of both carbon
filters is as stated below. Cut off power of the product before you change the carbon
filter.Carbon filter should be replaced with a new one each 3-5 months because it is
used at kitchens that does not have chimney outlet.Carbon filter should never be
washed.Oil filters should be montaged on the product even though carbon filter is
used or not. Do not use your product without oil filter.
Changing Carbon Filter
2 Carbon filters should be used at the product.In order to place the carbon filter,
locating the canals on the motor cover and the canals on the carbon filter on the same
level turn it clockwise.In order to take it off, turn it anti-clockwise.
Figure 6
-9-
Usage of 3 Speed Digital Control
Peel protective papers out from the inox devices after assembly.
Speed Choice
The device has 3 degrees of ventilation. According to the cooking and frying steam, you can
choose low-middle-high ventilation levels. Buttons on the front panel are used for turning the
device on. The models with eletronic controllers have automatic timers. 15 minutes automatic
timer is turned on, when pressed any of the buttons, which starts the motor up, more than 2
seconds. When timer starts, display will signal and after 15 minutes motor will automaticly stop.
Please turn on hob and hood at the same time to activate circulation. This will provide positive
effect on vacuum power. Let the device run for a while after cooking process is finalised, thus the
remaining smell and steam will be absorbed.
2nd Speed
3rd Speed Lamp Button
Cleaning Periods of Aluminum Filter
Filter should be cleaned when “C” signal appears on the Display or each 2-3 weeks (in accordance
with the usage frequency). After cleaning and replacing filters to their places, button should be
pressed for more than 3 seconds (when the product is off) in order to remove the “C” signal. “E”
signal will appear on Display and product will start working at normal position. If you want to
continue using your product without removing “C” signal, active speed will appear for 1 second
when you press
button, then “C” signal will appear once more and the motor will continue operating.
Illumination
The product has 2 lamps and one lamp button to operate illumination. Press lamp button in
order to start illumination.
Usage of the Control Panel
Speed Selection
You device has 3 levels of ventilation . Depending on the cooking and frying steam , you should
run the device with low- medium or high speed. To run the device , on the front panel there are
motor switch and lamp switch. Please select the desired ventilation speed.
Slider Positions
Illumination
There are two lamps and one switch that controls the illumination on the device. To turn the lamps
on please pres on to the indicated position.
0
0
(only on rangehoods with motors)
The product you use has carbon filters. Useage of both carbon filters is as stated
below. Cut off power of the product before you change the carbon filter. Carbon filter
should be replaced with a new one each 3-5 months because it is used at kitchens
that do not have chimney outlets. Carbon filter should never be washed. Oil filters
should be montaged on the product even if carbon filter is used or not. Do not use
your product with oil filter.
