44
Esc soft key. To move to the next system parameter for editing, press the Next
or Prev soft key. The Exit soft key is also available to return to the System
parameter screen. When the Enter soft key is pressed the Alarm volume is
accepted and you transition into the next system parameter: Contrast.
4.3.5 Editing Contrast
Use the
,
soft keys to navigate to the Contrast parameter. Pressing the Edit
soft key will provide the following screen:
Contrast = indicates the status of the contrast setting that is programmed into the
instrument.
Contrast Range: indicates the contrast range that can be programmed into the
instrument.
Use the numeric keypad to enter in the contrast. The ranges available are 1
– 9,
where 9 is the highest contrast or the darkest. Press the Enter soft key to accept
the parameter. To cancel the editing of contrast setting, press the Esc soft key.
To move to the next system parameter for editing, press the Next or Prev soft key.
The Exit soft key is also available to return to the System parameter screen.
When the Enter soft key is pressed the Contrast is accepted and you transition
into the next system parameter: Power Up.
4.3.6 Editing Power Up
Use the
,
soft keys to navigate to the Power Up parameter. Pressing the Edit
soft key will provide the following screen:
