64
When you press the Edit soft key you will be moved to the specific parameter
screen for editing. If you press the Exit soft key you will be brought back to the
set screen.
4.6.1 Editing Start and End Angle (PROGRAM Mode only)
Use the
,
soft keys to navigate to the Start Angle or End Angle parameter
(only selectable for AC output). Pressing the Edit soft key will provide one of the
following screens:
Start Angle = indicates the start angle that is programmed into the instrument.
Start Angle Range: indicates the start angle range that can be programmed into
the instrument.
End Angle = indicates the end angle that is programmed into the instrument.
End Angle Range: indicates the end angle range that can be programmed into
the instrument.
If you edit the start angle or end angle on a particular step, all 9 steps in that
memory location will automatically be set to the same start angle and end angle.
If several steps are connected together to form a sequence of tests, the start
angle will apply to the first step in the sequence and the end angle will apply to
the last step in that sequence.
If memories are connected together as part of a test sequence, the start angle
