GB
|
Operating Instructions
2
Chain saw attachment
GM AAS 4025 Gartenmeister
Technical Data
Battery voltage/operation voltage
40 V DC
Guide Bar
250 mm / 10“
Chain 91P040X
Guide Bar Type
100SDEA318 Oregon
Speed
4,5 m/s
Battery type
(not included in the scope of delivery)
R3-360-AH-U-02
Voltage / battery capacity / energy
Li-Ion
40 V / 2,5 Ah / 100 Wh
Charging device
(not included in the scope of delivery)
R3-360-3A-02 Quick charger
R3-360-1A-02 charger
Runtime max.
ca. 95 Min.
Weight
(without guide bar and chain)
3,9 kg
Oil
70
ml
Sound Pressure Level L
pA (2000/14/EG)
86,7 dB(A) [
K 3,0 dB(A)]
Measured
sound power
level
L
WA
97,4 dB(A) [
K 3,0 dB(A)]
Vibration
< 2,5 m/s
2
[
K 1,5 m/s
2
]
Technical changes are reserved.
Emissions
-
The specified vibration emission value was measured by a standardized test methods and can compare with other
power tools are used.
-
The specified vibration emission value can also be necessary for the assessment of work breaks are used
.
-
The specified vibration emission value can vary during the actual use of the electric tool by specifying the value,
depending on the way how to use the power tool.
-
Note: You create the privilege against vascular pulsations of the hands in time breaks
-
Try to keep the stress due to vibration as low as possible. For example, measures to reduce vibration stress are
wearing gloves when using the tool and limiting the work time. All phase of the operating cycle must be considered
in this regard, (for example, times when the power tool is switched off, and times when the power tool is switched
on but is not running under load).
Battery-powered telescopic handle Gartenmeister
(not included in the scope of delivery)
Technical Data
Rated Voltage
40 V DC
Battery type*
R3-360-AH-U-02
Voltage / battery capacity / energy
Li-Ion 40 V / 2,5 Ah / 100 Wh
Charging device *
R3-360-3A-02 rapid charger
R3-360-1A-02 standard charger
* not included in the scope of delivery
Technical changes are reserved.
