Petrol brushcutter
RATINGS
Model
IBF 25-1
Engine output
kW
0,8
Engine type
2-stroke
Cubic capacity
cm³
25
Fuel
lubricated petrol
40:1
Tank volume
ml
500
Idling speed min
-1
3000
Maximum engine speed
min
-1
10500
Max. speed of the cutting tool
min
-1
8500
Fuel consumption
kg/h
0,38
Cutting diameter
cm
43 (Blade = 23)
Cord diameter
mm
2,0
Overall cord length
m
2 x 3,0
Cord extension
Tap’n go
Weight
kg
6,5
Noise level
dB (A)
97,4
[K 3,0 dB(A)]
Vibration – racing
m/s
2
9,839
[K 1,5 m/s
2
]
Vibration – idling m/s
2
3,192
[K 1,5 m/s2]
Technical changes reserved.
The devices are manufactured in accordance with the provisions of DIN EN ISO 11806 and fully comply with the
provisions of the German Product Safety Act.
Notice:
The vibration value indicated was determined with a standardized tool and can be used to make comparisons
with other petrol equipment as well as temporary estimates of the load through the vibrations.
WARNING!
The vibration value may vary according to the usage of the machine and its fitted equipment, and
be higher than the one indicated. Safety measures must be established to protect the user and must be based on
the load estimate generated by the vibrations in real usage conditions. In this regard, all the operational cycle phases
must be taken into consideration, such as switching off or idle running.
WARNING:
This machine’s starter unit generates an average sized electromagnetic field, but it is not however
possible to exclude the possibility of interference on any active or passive medical devices that operators may be
wearing; this could be risky for their health conditions. All those using medical devices should always consult their GP,
or the device manufacturer, before using this machine.
WARNING:
Prolonged exposure to vibrations can cause injuries and neurovascular disorders (also called
“Renaud’s syndrome” or “white hand”), especially to people suffering from circulation disorders. The symptoms can
regard the hands, wrists and fingers and are shown through loss of sensitivity, torpor, itching, pain and discolouring
of or structural changes to the skin. These effects can be worsened by low ambient temperatures and/or by gripping
the handgrips excessively tightly. If the symptoms occur, the length of time the machine is used must be reduced and
a doctor consulted.
When working with the device, a certain level of noise cannot be avoided. Noisy work should be scheduled for hours,
during which it is allowed by statute or other local regulations. Adhere to any applicable rest times and limit your work-
ing time to the necessary minimum time. For your personal protection and the protection of people nearby, suitable
hearing protection must be worn.
Noise emission information in accordance with the German Product Safety Act (ProdSG) and the EC Machine
Directive: the noise pressure level at the place of work can exceed 80 dB(A). In such cases the operator will require
noise protection (e.g. wearing of ear protectors).
Please do also consider any local regulations concerning noise protection!
GB-3
GB
|
Operating Instruction
Summary of Contents for IBF 25-1
