12
Blue light quick blink continuously
Calling/incoming call
Blue light quick blink once every 4
seconds
Conversation mode
Red light quick blink twice every 30
seconds
Low battery
8. Indication tone
Indication tone
Status of the headset
Continuous two indication tone
every 5 seconds
Conversation mode and
microphone mute
Three “dong” warning tone every
30 seconds
Low battery
Care and maintenance
Read the following recommendations carefully before using IKBT14.
Following these you will be able to enjoy this product for many years.
Keep the charger jack’s cover have already pluged tightly if the headset
be worked under the conditions of wet or steam, to avoid the product’s
internal circuit being affected.
Keep it dry to avoid the water goes into the inner of headset and don’t
put it in the dump place to avoid the product’s internal circuit being
affected.
Keep the product away from direct sunlight or hot places. High
temperatures will shorten the life of electronic devices, destroy the
battery or distort certain plastic parts.
Don’t let the water goes into earplug and charging jack when you use the
headset under the condition of touching water easily.
Don’t let the headset touch hot water.
Don’t expose the product to cold areas. It may damage the internal circuit
board.
Don’t try to disassemble the product as it may get damaged if you are not
professional.
Don’t let it fall down onto the floor or other hard surfaces. The internal
circuit might get damaged.
