IKUSI MAC-HD Web Interface User Manual Download | Manualshive

Page: 4 / 26

background image

Introduction

4

Introduction

About this Manual

This manual describes the configuration environment of the MAC-HD modulator based on
web interface via Ethernet connection.
The Manual covers all configuration options: from start-up and operation, to adjusting the
settings and troubleshooting for the MAC-HD.
The description consist of the connection procedure and access to the configuration set-
tings, description of the environment and its contents, configuration options and interpreta-
tion of the information on the screen.

NOTE

This configuration manual is a practical reference guide. For the correct use and
installation of the MAC-HD, it is essential to read the corresponding user manual
(please see www.ikusi.tv for the manual).

Product Description

The MAC-HD is a standalone modulator that can process different Video and Audio for-
mats, to create a high-definition COFDM channel.
This product offers a solution to video signal distribution requirements in residential installa-
tions, hotels, special buildings or security video monitoring installations with COFDM digital
TV modulation. Likewise, the MAC-HD comes with a USB Interface which can incorporate
new functions thanks to the equipment’s evolvable software, such as: video playback from
USB for digital signage and other possible future functions

Features

The unit has various inputs:
• Two analogue audio and video channels, through 6 RCA connectors.
• One digital video and audio channel in HDMI format, through an HDMI connector.
• One digital video and audio channel in HD-SDI format, through a BNC connector.

Possible combinations:

•

SD CVBS/Audio + SD CVBS/Audio

•

SD HDMI + SD CVBS/Audio

•

SD SDI + SD CVBS/Audio

•

SD + USB

•

HD HDMI

•

HD SDI

•

HD + US

B

2 simultaneous SD channels
1 channel SD + USB

1 channel HD
1 channel HD + USB

Output: • Digital DVB-T TV signal over an RF carrier in VHF/UHF

• IP signal (configurable only through web interface, no by SPI-300)

Means of configuration:
• Web interface via Ethernet Connection

(compatible con aplicación IKUSI HEADEND DISCOVERY).

• LCD screen with control button.

«
...
2
3
4
5
6
...
»

Summary of Contents for MAC-HD



























Reviews:

No comments

Related manuals for MAC-HD

Brand: Tefi Vintage Lab Pages: 2

Brand: Profline Pages: 6

Eco-Calc DH-202

Brand: Datexx Pages: 1

Brand: Datexx Pages: 25

Brand: Casio Pages: 27

Brand: Casio Pages: 85

Brand: Casio Pages: 10

8305 KitchenCalc Pro

Brand: Calculated Industries Pages: 25

Spice-Based Galaxy Calculator

Brand: Caltech Pages: 43

Brand: Texas Instruments Pages: 16

-30XIIS - Handheld Scienfic Calculator

Brand: Texas Instruments Pages: 118

83CML/ILI/U - 83 Plus Graphics Calc

Brand: Texas Instruments Pages: 446

TI-34 - MultiView Scientific Calculator

Brand: Texas Instruments Pages: 3

Solar Little Professor

Brand: Texas Instruments Pages: 96

Brand: MOB Pages: 4

Brand: Clas Ohlson Pages: 4

Brand: Clas Ohlson Pages: 8

Brand: Citizen Pages: 24

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands