15
Basic installation and configuration
/Module configuration
J
ikUnet network
:
F
maC addreSS:
shows the number which
identifies the unit for network connection.
F
ip addreSS:
shows the number of the IP
address.
F
network maSk:
shows the network
mask code.
F
defaUlt gateway:
shows the Gateway
IP address.
F
dhCp pool - Start:
allows the number of the first IP address in the range of IPs
to be included to be entered.
F
dhCp pool - end:
allows the number of the last IP address in the range of IPs to
be included to be entered.
F
modify ikUnet:
click on the button to save the changes.
F
reStore:
click on the button to omit the changes.
J
paSSword:
F
old paSSword:
enter the current pass-
word for the home page.
F
new paSSword:
enter the new pass-
word.
F
Confirm new paSSword:
enter the
new password again.
F
Send:
click on the button to save the changes.
F
CanCel:
click on the button to omit the changes.
J
reboot modUle:
F
reboot iCon ( ):
reboots the module
in the event of blocking.
modUle firmware Update:
F
modUle Updated verSion:
shows
the number of the current firmware version.
F
verSion:
list of imported firmware version
numbers.
F
browSe:
click on the button to select the
route for the firmware file to be imported.
F
Update modUle:
click on the button to
import the selected firmware file.
Module configuration
Permits the modification of the operating parameters for the multiswitch, the inputs and the
output of the module. To access from the main menu, click on
headend > headend
modUleS liSt.
EN
