21
Basic installation and configuration
/Service Management
Management of output services
NoTE
If the bandwidth is saturated, delete the output services not required selecting
the checkboxes in the
delete
column ( 1 ) and clicking on
Save ServiCeS.
J
LCN management ( 4 ):
F
The DVB-T input services have an LCN (Logic Control Number) which is transmitted
in the output services (see LCN column).
F
The DVB-S/S2 input services do not usually have an LCN. The headend automati-
cally allocates an LCN for the DVB-T output signal of these services.
F
To modify an LCN (see LCN column, cells with yellow background):
i) Place the cursor in the LCN cell to be modified.
i) Modify the LCN.
i) Click on the
Save lCn valUeS
button.
J
Output services saturation level:
The saturation level of the output multiplexes can be controlled with the instruction on
empty packets (stuffing) and the information about the data transfer speed ( 5 ).
F
The information on empty packets reflects the available bandwidth in the output
multiplex and is indicated in real time in the lower table
oUtpUt bitrate
of the
headend ServiCe management
window with the following columns:
Ì
max. bitrate:
data transfer speed of the output multiplex.
KEY
1
Deletion of the output service.
2
Lock open: service processing not encrypted.
3
Lock closed: service encrypted.
“Ok” icon = unencryption correct.
“Not ok” icon = unencryption failed.
4
LCN. Logic Control Number emitted by the
DVB-T output signal of the headend.
Yellow cell = LCN free.
5
Monitoring of bandwidth of available output
signal.
EN
