23
Status Information
Click on the
Status
menu on the left of the general program screen and click again on
the
Status Information
option
.
The Status Information window appears:
Figure 3.1 - Status Information window
This window gives you information on the existence of alarms for module operations
and on the importance reception and transmission parameters:
"Hardware Alarm" : Indicates whether there is an anomaly in the modules circuitry.
A
✓
mark indicates correct status or operations and a cross
✖
warns of an alarm
situation.
"Input": Indicates whether there is (
✓
) synchronisation or not (
✖
) with the input
signal. In cases where there is not synchronisation, check the settings made in the
Input Settings (page 14).
"CAM": Indicates whether the CAM module works properly (
✓
) or either it doesn't
work properly or no CAM is installed (
✖
).
"BER": Expresses in scientific notation the channel BER value for the input signal.
"C/N (dB)": The value in dB of the carrier/noise ratio of the input signal.
"Number of Streams": Number of IP streams currently transmitted by the TNS-101
module.
«Bandwidth»: Value in Mbps.
"Information Sent (MB)": Expresses in scientific notation, the amount of information
(in megabytes) which has been transmitted by the internal web server since the last
module reset.
"Information Received (MB)": The same for information received.
Status Information
