Operating manual - English
HALLEY BKA 2000
9
3
MACHINE DESCRIPTION
HALLEY BKA 2000 is a professional key-cutting machine for ABLOY® - ABUS GRANIT® / PLUS® -
AVA CHUBB® - FORD CHUBB® - IFAM - LUMA® - BIT - DOUBLE BIT - PUMP keys. The machine
comprises the following main parts:
Safety device
(
standard with 230V key-cutting machines)
The device is connected to a power plug with a differential switch, power the key-cutting machine by
pressing the switch (X1).
The warning light (X2) illuminates to indicate voltage in the plug (X3).
ATTENTION: switch (X1) is electromagnetic, in the event of a power failure it goes out automatically. When
electricity is restored it must be reset manually to power the machine again by means of the plug
(X3).
Master switch
The motor starting button is placed on the right side of the motor of the HALLEY BKA 2000 key-cutting
machine.
ATTENTION: the switch is illuminated to indicate that the machine is live.
Motor
The HALLEY BKA 2000 has a direct drive motor (G). The transmission unit comprises the motor and
cutter is protected by a single cover (H).
Mobile unit
The mobile unit comprises a carriage (B) holding the clamps.
The carriage (B) is fitted to the translation shaft and is moved manually by the operator.
It has been designed to avoid the accumulation of cutting dust or chippings.
•
Cutting tool (O)
The cutting tool is the part of the HALLEY BKA 2000 machine which cuts the key blank. The tool is in
HSS super rapid steel and is protected by a special cover (H) to ensure safe operation.
•
Tracer point (N)
The tracer point is housed on the left-hand side of the machine base. Its depth settings are easily
regulated.
3.1
Technical data
ELECTRICAL PROPERTIES:
230V - 50Hz 190W 2A;
110V - 60Hz 190W-5A.
CUTTING TOOL:
Super Rapid Steel (HSS)
MOTOR:
One speed single phase;
230V-50Hz 1350 rpm 0,18 kW;
110V - 60Hz 1680 rpm 0,18 kW.
CLAMP: 2
sides
CARRIAGE MOVEMENT:
manual
DIMENSIONS:
width: 470 mm, depth: 350 mm, height: 260 mm
CUTTING NOISE:
Lp (A) = max. 99,7 dB (A)
WEIGHT: Kg.
26
® Trade marks
