Operating manual - English
HALLEY BKA 2000
7
1
TRANSPORT
The HALLEY BKA 2000 key-cutting machine is easily transported and is not dangerous to handle.
The packed machine can be carried by one person.
1.1
Packing
The HALLEY BKA 2000 key-cutting machine comes in a strong cardboard box, the dimensions of which
are shown in fig.3, designed to protect the machine and all its parts even when it is stored for long
periods.
Fig. 3
1.2
Transport
It is advisable to use the packing every time the machine is transported, as this will avoid knocks which
could cause damage to the machine, persons or things.
1.3
Unpacking
To remove the machine from the packing box:
1) cut the straps with scissors and remove,
2) open the box without damaging it as it may be used again (e.g. removals, dispatch to the
manufacturers for repairs or servicing),
3) check the contents of the box, which should comprise:
- 1 HALLEY BKA 2000 key-cutting machine;
- 1 safety device (standard with 230V key-cutting machines);
- set of documents, including: operating manual, spare parts list and guarantee;
- 1 set of accessories.
1.4
Machine handling
When the HALLEY BKA 2000 key-cutting
machine has been unpacked, place it directly
on its workbench.
This operation can be carried out by one
person,
firmly holding the base, and no
other part, to lift and carry the machine
.
Fig. 4
400 mm
600 mm
41
0 mm
Keep dry
This side up
Handle with care
