ASSEMBLY INSTRUCTION Page: 2
Parts List
Secure the rear tube with
screw (#14), washer (#12),
and nut (#11) by the allen
wrench
Loose ball (#15) and take out
pin (#9) ,then open the main
frame.
Insert the pin (#9) and
secure the ball (#15).
Secure the seat (#4) on the
seat tube (#5).
Loose the adjust knob, and
insert the seat tube (#5). Then,
tighten the adjust knob.
Insert the handle bar
w/meter (#1) into main
frame. Secure with the screw
(#2) and washer (#3).
Connect the meter wire.
Secure the pedal (#10, #16)
with allen wrench.
Assembly done.
