background image

b.Only one owner card is allowed for each lock. For convenient management, the same 

owner  card  can  be  programmed  as  the  owner  card  of  all  or  some  of  the  locks  in  a 

project. 

II. Master Card (3 pcs) or Master Code (1 pc) 

A. Master Card (3 pcs) 

Program Master Card:

  

Scan the 

owner card

 near the inductive area Dirst, indicator light blinks, during the blinking 

period, and scan another EM card, after a beep sound, the card programmed by the owner 

card is Master card. 

Delete Some Master Card:

  

Scan the owner card near the inductive area Dirst, indicator light blinks, during the blinking 

period, and scan the master card, after two beeps sound, the master card is deleted. 

Delete All Master Cards:  

Scan  the  owner  card  near  the  inductive  area,  indicator  light  blinks,  during  the  blinking 

period, and scan the owner card again, after three long beeps sound, all the master cards are 

deleted, and the user code and user cards are also removed. 

Note:  

a. Master card is used to program or delete user code and user cards and also used for 

unlocking.  After  unlocked  by  master  card,  the  user  code  and  the  user  cards  are 

removed.  

b.  For  convenient  management,  the  same  master  card  can  be  programmed  as  the 

master card of all or some of the locks in a project.  

B. Master Code (optional

)

 

  Program Master Code:

  

Scan  the 

owner  card

  near  the  inductive  area,  indicator  light  blinks,  during  the  blinking 

period,  press 

“*”

  button,  enter  digital  a  code(max  nine  digit)  and  followed  by 

“#”

  button, 

after a beep sound, the programmed code is Master code. 

Delete Master Code:  

Scan  the  owner  card  near  the  inductive  area,  indicator  light  blinks,  during  the  blinking 

period, and scan the owner card again, after 3 long beeps sound, the master code is deleted, 

and the user code and user cards are also removed. 

Note:  

a.  The  Master  code  is  used  to  program  or  delete  user  code  and  user  cards  and  also 

used for unlocking. After unlocked by master code, the user code and user cards are 

removed.  

b.  For  convenient  management,  the  same  master  code  can  be  programmed  as  the 

 

Ilockey Technology Co.,lTD 

                            

                              

Focused on smart lock  solution

 

Summary of Contents for IC 906








Reviews: