period, press
“*”
button
—→ original permanent code —→
“#”
button, after 2 short beeps
sound and indicator light blinks again, during the blinking period, and press
“*”
button
—→
new digital code —→
“#”
button, after a long beep sound, the original permanent code is
replaced by new permanent code.
Delete Permanent Code:
Scan the master card (or enter master code) near the inductive area, after a beep sound, the
lock is unlocked, and the permanent code is deleted.
Note:
After unlocked by the master card or master code, the permanent code is deleted and
a new permanent code must be programmed again.
To Manual-lock(The default is in manual-lock mode):
(
In unlocked status) Press
“#”
button, after 2 beeps sound, the lock is locked.
To Unlock:
Press
“*”
button
—→ permanent code —→
“#”
button, after a beep sound, the lock is
unlocked.
To Auto-lock:
Press
“*”
button
—→ permanent code —→
“#”
button, after a beep sound, the lock is
unlocked; indicator light on 4 seconds, after 2 short beeps sound, the lock is automatically
locked.
The Conversion between Manual-lock and Auto-lock in Permanent Code Mode
a).
Depress
“*”
button, and scan the
master card
, after 3 long “beeps” sound, the default
manual-lock mode converts to auto-lock mode.
b)
. Depress
“*”
button, and scan the
master card
, after 5 long “beeps” sound, the auto-lock
mode converts to manual-lock mode.
D. User Card (5 pcs)
Program User Card:
Scan the master card near the inductive area (or enter a master code), indicator light blinks,
during the blinking period, scan another card near the inductive area, after a beep sound, the
card programmed by the master card is User card. During the blinking period, some more
user cards can be processed until max Dive pcs.
Delete User Card:
Scan the master card (or enter a master code), after a beep, the lock is unlocked, and the user
cards are deleted.
To Lock:
Scan the user card near the inductive area, after two beeps sound, and the lock is locked.
Ilockey Technology Co.,lTD
Focused on smart lock solution
