background image

To Unlock:

  

Scan the user card near the inductive area, after a beep sound, and the lock is unlocked. 

Note:  

User card can be used to lock or unlock in either one-time code mode or permanent 

mode independently; If one mode converts to the other mode, the user card cannot be 

used and must be programmed again. 

E. User Card + One-time Code

  

  To Lock: 

  

Scan the user card near the inductive area, after a beep, and the lock is unlocked, indicator 

light  blinks,  during  the  blinking  period,  press 

“*”

button  —→  digital  code  —→

“#”

  button, 

after two beeps, the lock is locked. 

  To Unlock: 

   

Scan the user card near the inductive area Dirst, indicator light blinks, during the blinking 

period, press 

“*”

button —→ digital code —→

“#”

button, after a beep, the lock is unlocked. 

Delete “User Card + One-time Code”:  

Scan the master card near the inductive area (or enter a master code), after a beep, the lock 

is unlocked, and the “user card + one-time code” is deleted. 

Note:  

User card + one-time code can be used only in one-time code mode. 

Functions: 

Light Indication in Locked Status 

When the lock is in locked status, indicator light blinks every 6 seconds to indicate the lock in 

use.  

Illegal Card or Wrong Digital Code Alarm 

Scan  any  illegal  EM  card  or  enter  any  wrong  digital  code  four  times,  the  lock  emits 

continuous beeps alarm 

20 

seconds. (During the warning, scan opening card can terminate 

the signal). 

Anti-picked (prized) Alarm 

If  the  latch  is  pressed  or  picked  by  the  illegal  way,  the  lock  emits  continuous  alarms 

20 

seconds. (During the alarm period, scan the opening card can terminate the signal) 

Alarm OFF or ON Conversion 

Alarm OFF: In locked status(latch out), scan the owner card near the inductive area, 

red  light  blinks,  then  press  the  latch,  after  two  beeps  sound,  the  alarm  function  is 

cancelled(silent mode); 

Alarm ON: In locked status(latch out), scan the owner card, red light blinks, then press 

the latch, after one beep sound, the alarm function is resumed again (alarm mode). 

Low Voltage Alarm 

 

Ilockey Technology Co.,lTD 

                            

                              

Focused on smart lock  solution

 

Summary of Contents for IC 906








Reviews: