When operating voltage is on or below DC3.7 ± 0.2, scan the opening card or enter a digital
code to unlock, indicator light blinks, and the lock emits continuous eight beeps alarm to
show low voltage, the batteries must be replaced with new ones.
Emergency Unlocking
In case the batteries used up, use a 6V battery pack charger to insert into the power port on
the side section of the front panel, then scan the opening card or enter a digital code to
unlock.
Auto-unlock Function
For example, the cabinets are used by shift work employees; the cabinets can be used
within the set time, when the set time is due, the cabinets will be automatically
unlocked for next shift work employees use, in this case, the cabinet lock must be set
auto-unlock function.
The default is in non auto-unlock mode
a).
Depress
“*”
button, and scan the master card near the inductive area, after three short
“beeps” sound, it is 24-hour auto-unlock mode.
b).
Depress
“*”
button, and scan the master card near the inductive area, after two short
“beeps” sound, it is 12-hour auto-unlock mode.
(c).
Depress
“*”
button, and scan the master card near the inductive area, after one short
“beep” sound, it is not auto-unlock mode. )
Note:
1. The user code (one-time code or permanent code) can be used only after the owner
card and the master card(s) or master code must be programmed Uirst;
2. Digital code is the general name, including master code, permanent code, and one-
time code;
3. User code: permanent code or one-time code;
4. Opening card: master card or user card;
5. Digital code digit is from 1-digit to max 9-digit, any number combination from 0 to 9
6. Light and sound prompt:
To lock: red light and 2 beeps sound;
To unlock: a green light and a beep sound;
7. When scanning the card near the inductive area, you can scan near the front side or
from the back side; the real side sensitivity is better due to the back side is entirely
plastic material.
8. Owner card is essential and should keep it in safety! (If the user forgot about the
password and could not open the cabinet, and the master card was lost or taken
away by the employed manager, How to unlock the cabinet? Use the Owner card to
delete the existing master card and program a new master card, use the new master
card to open the cabinet!)
Ilockey Technology Co.,lTD
Focused on smart lock solution
