SHENZHEN
SHENZHEN
ILOCKEY
ILOCKEY
TECHNOLOGY
TECHNOLOGY
CO.,LTD
CO.,LTD
Add: 6F Shuipan building, No 3193Binghe Avenue , Futian District, Shenzhen City. China 518033
TEL: +86-755-28689800
FAX: +86-755-28689801
Email: info@ilockey.com
Http://www.ilockey.com
2
General Information:
Exit setting mode: Enter * to exit the setting procedure, or wait for 10 seconds
Low battery warning: When the voltage drops below 5.2V after entering a valid code,
the lock beeps for three times.
Unlocking indicator: Music sounds and motor rotate.
Locking indicator: Red Light flashing one time, and music sounds and motor rotate.
Retrieve Factory Default:
a. Disconnect 1pcs battery
b. Press and hold the reset button
c. While holding the reset button, reconnect the battery
d. Until the lock beeps, release the reset button.
e. Press digit ‘1’ to retrieve factory default or other digit to abort reset procedure.
f. The lock must be set up again after the reset is complete.
Warning: After retrieve, all existing user codes and current programming code will
be erased. Default Programming Code will be restored , but
the enrolling of
lock with gateway will not be erased.
The reset button is located below the
battery holder. (See Picture)
Types to operate the lock:
User code unlock: 6 digits user code
Emergency unlock: 8 digits programming code + 9 (for emergency)
Wireless :Mobile or PC or PAD
Manual key: Turn the override key 90 degree clockwise, then turn the handle
