iLOQ Oy • Oulu, Finland • www.iLOQ.com • iLOQ is registered trademark of iLOQ Oy •
©2022 iLOQ Oy. All Rights Reserved •
8 GENERAL NOTES
1. Care should be taken to ensure that any seals or weather-stripping fitted to the
complete door assembly, does not inhibit the correct operations of the cylinder.
2. Care should be taken to ensure that no projection of the cylinder and associated parts,
can prevent the door swinging freely.
3. All components necessary for the specific installation should be fitted.
4. Before fitting D50S cylinder to a fire/smoke resisting door, the fire certification should
be examined, to ensure conformity.
5. The iLOQ cylinders are successfully tested according the EN 1634-1 (EUFI29-
19003368) for 120 minutes in a hinged single leaf steel door.
6. The key is to be kept securely so that only authorized person may have access.
7. In case of losing a key, blocklisting of the lost key shall be done with the iLOQ
Manager software and affected locks shall be reprogrammed.
9 DECLARATION OF CONFORMITY
The products mentioned inside this user guide are in conformity with the requirements of the
following directives:
2014/53/EU Radio Equipment Directive (RED)
2011/65/EU Restriction of the use of certain hazardous substances (RoHS)
The conformity was assessed in accordance with RED module A by using the following harmonized
and other EN standards:
RED:
Art 3.1(a) Safety
EN 62368-1:2014 + AC:2015 + AC2:2015
Art 3.1(b) EMC EN
EN 301 489-1 v2.2.3
EN 301 489-3 v2.1.1
Art 3.2 Spectrum
EN 300 330 v2.1.1
RoHS
EN 50581:2012
