Page 11 of 16
9. REMOVING AND INSTALLING THE OUTSIDE KNOB
In some installation locations it is necessary to remove the outside knob from the lock cylinder. Follow
these instructions to remove the knob. Re-installing with the same instructions in the opposite order.
Be careful when inserting knob not to break the connections on the cylinder. The removal of the knob
is only possible for people who have access rights for the cylinder.
A. Insert a key with access into the lock cylinder. Turn the key about 15 degrees clockwise.
B. By turning the key, the blocker hatch will open automatically at the bottom of the outside knob.
The hatch protects the fixing screw for unauthorized access.
C. Use Torx 6 tool to open the screw that holds cover cup, turn the Torx tool counterclockwise.
D. Remove the cover cup.
A.
B.
C.
D.