Page 3 of 16
1. BEFORE INSTALLING
1. These instructions should be carefully followed during installation. These instructions and any
maintenance instructions should be passed on by the installer to the user.
2. iLOQ D5S cylinders must be installed and used carefully without excessive force.
3. The product should not be modified in any way except in accordance with the modifications
described in these instructions.
4. Where the D5S cylinder is manufactured in more than one size it is critical that the correct size is
selected.
5. Care should be taken to ensure that any seals or weather-stripping fitted to the complete door
assembly, does not inhibit the correct operations of D5S cylinder.
6. Care should be taken to ensure that no projection of the D5S cylinder and associated parts, can
prevent the door swinging freely.
7. All components necessary for the specific installation should be fitted in order to ensure compliance
with EN 15684 standard.
8. The cylinder must project less than 1 mm on outside of the door to ensure proper operation.
9. No liability is accepted for damage to the doors or components due to incorrect installation.
10. Before fitting D5S cylinder to a fire/smoke resisting door, the fire certification should be examined,
to ensure conformity.
11. To extend the cylinder length use only the associated D5 cylinder extensions (AD5.Exx).
12. It is not allowed to uninstall resp. demount the anti-panic mechanism because due to that the
mechanism and functionality of the panic functionality can not be guaranteed anymore.
13. In the case the panic mechanism of the panic mortise locks can be blocked or influenced in a
negative way by the cylinder cam, it is mandatory to install the panic cylinder (D5S.7xx). The use of
the other cylinder types (D5S.1xx/2xx/3xxx/4xx/5xx etc.) are only allowed if the lock do not need a
specific cam position resp. the cam could not block the panic functionality. Please double-check the
letter of conformity of the mortise lock manufacturers.
14. When used in combination with panic locks, it is essential to ensure after installation that all parts
of the lock are in an operational condition and that the panic function of the mortise lock is guaranteed.
15. The long neck versions are specially developed for doors where the Euro-profile cut out is not
existing inside the door frame and only a round hole is possible to find.
16. To meet the German VdS (VdS Schadenverhütung GmbH) requirements class CZ+ on burglary
threatened doors use D5S.XX0A.SB high security cylinder installed with a VdS approved security lock
furniture of class B or C.
17. The cylinders may only be used for the purpose of opening and locking doors; other use is not
permitted.
18. We reserve the right to make modifications or further technical developments without further
notice.
19. If there are any deviations from the contents in foreign language versions of the documentation,
the English original shall apply in case of doubt.
