iLOQ Oy • Oulu, Finland • www.iLOQ.com • iLOQ is registered trademark of iLOQ Oy •
©2018 iLOQ Oy. All Rights Reserved •
8. GENERAL NOTES
1. Care should be taken to ensure that any seals or weather-stripping fitted to the complete door
assembly, does not inhibit the correct operations of the cylinder.
2. Care should be taken to ensure that no projection of the cylinder and associated parts, can
prevent the door swinging freely.
3. All components necessary for the specific installation should be fitted.
4. The key is to be kept securely so that only authorized person may have access.
5. In case of losing a key, blocklisting of the lost key shall be done with the iLOQ Manager software
and affected locks shall be reprogrammed.
9. DECLARATION OF CONFORMITY
The products mentioned inside this user guide are in conformity with the requirements of the following
directives:
2014/53/EU Radio Equipment Directive (RED)
2011/65/EU Restriction of the use of certain hazardous substances (RoHS)
The conformity was assessed in accordance with RED module A by using the following harmonized
and other EN standards:
RED:
Art 3.1(a) Safety
EN 62368-1:2014 (2nd Ed)
EN 60065:2014 (8th Ed)
EN 60950-1:2005 (2nd Ed) + A1:2019 + A2:2013
Art 3.1(b) EMC EN
EN 301 489-1 v2.2.3
EN 301 489-3 v2.1.1
Art 3.2 Spectrum
EN 300 330 v2.1.1
RoHS
EN 50581:2012
Other standards used:
EN 15684:2020
