INSTALLATION INSTRUCTIONS
LED DUSK-TO-DAWN
November 5, 2014
ILP
–
Industrial Lighting Products, LLC
519 Codisco Way, Sanford, FL 32771
Phone: (407) 478 3759 Fax: (407) 478 3760
www.ilp-inc.com
2. Arm mount luminaire to wall or vertical surface with supplied pipe arm:
Step 1
Assemble tube sections and secure with locknut
(note: one section may be used to aim luminaire
at high angle for longer forward light throw)
Step 2
Feed supply wires through the arm assembly and
connect to the power leads from the fixture. Slide
the fixture over the arm and clamp securely. Ensure
the fixture does not rotate on the arm before
continuing.
Step 3
Attach the mounting clamp to the arm and
secure with the provided hardware. Ensure the
clamp does not rotate on the arm before
continuing.
Step 4
Attach luminaire and arm assembly to wall or
vertical surface securely with four screws.
Apply
silicone sealant around wire/wall opening
.
R
estore power to circuit and test to confirm
proper operation.