iLuv
TM
Stereo Audio System for Your iPod
V11M11_IM_EN_10172007
www.i-Luv.com
- 14 -
OPERATIONAL INSTRUCTIONS
3.
Tune to the desired frequency as follows:
a) Automatic
Tuning
i)
Press and hold the
TUNE/SKIP
button on the top panel or remote control for two (2) seconds. Auto tuning will start.
ii)
The tuner will search the frequency for the next strong station and stop on that station. Repeat this procedure until the tuner stops on your
desired station.
b) Manual
Tuning
Repeatedly press the
TUNE/SKIP
buttons on the top panel or remote control until the frequency of the desired station appears on the display.
After entering the radio mode for about 20 seconds, the display will show the time mode again. Press the
TIME/MEMORY
button again to show the radio
frequency.
4.
Preset AM/FM stations in the tuner memory
This unit includes a 20 station preset memory. Store up to 10 FM stations and 10 AM stations in the tuner memory for immediate recall. The procedure
for storing stations in memory is as follows:
a) Preset
AM/FM
channel
i) Follow
instructions
under
“Listening to the Radio”
to select the first station you wish to memorize and the FM
frequency will show on the display. For example: FM 91.8 MHz.
ii)
Press and hold the
TIMER/MEMORY
button on the top panel or remote control, the preset channel number “01” begins
flashing on the display
iii) Press
the
/-
button on the top panel or remote control to select preset channel (CH 01 to CH10)
iv) Press
the
TIME/MEMORY
button on the top panel or remote control again to confirm.
v)
Repeat step i) to iv) to until you have memorized up to 10 stations. Press the
/-
button on the top panel or remote control to listen to
preset AM/FM channel CH01-CH10 at AM/FM mode.
Note
: The saved preset station will be lost if the AC Power is interrupted and the backup battery is not inserted.
Charging your iPod
If your iPod is connected to the unit, it will charge automatically at either
STANDBY
Mode, iPod Mode, FM Mode or AUX Mode.
Note:
Your iPod can not charge when the i166 is in AM radio mode.
AUX In
Connect the Audio Output jacks of your auxiliary sound source (TV, VCR, DVD Player, Cassette Deck, Mini Disc player, etc., etc.,) to the
AUX IN
jack on the
back panel of the unit.
The auxiliary function will only activate when the aux in jack is fitted with connection cable.