Iluv i199, Instruction Manual

Stereo Audio System for Your iPod                  

                                                                                                                                   V11M11_IM_EN_01122007 

www.i-Luv.com

- 15 -

OPERATIONAL INSTRUCTIONS 

Setting the Clock 

1. 

To set the time, locate the 

TIME

SET 

button. Press and hold the 

TIME SET

 button down until the Time display begins to flash. Set desired hour by 

using 

 or 

 control button on the unit. Once desired hour is selected, press the 

TIME SET

 button once more to set Minutes. Use 

 or 

control 

button until the desired time is displayed. (NOTE: AM / PM indicator displays are located on the left side of the time.) 

2. 

To secure the time setting and move to next setting, press the 

TIME SET

 button which will set the time and move you to date setting 

3. 

To set the correct month, you may use 

 or 

 control button until the desired month is displayed or press the 

TIME SET

 button to secure month 

setting and move to next setting. 

4. 

Use same method to set desired day/year. 

5. 

Once these steps are complete, Press the 

TIME SET

 button to secure time and date setting. 

Setting the Alarm 

This unit supports dual alarm feature. 
1. 

Press and hold either 

ALARM 1

 or the 

ALARM 2

 button until the display begins to flash. Use 

 or 

 control button until the desired alarm time is 

displayed, press 

ALARM 1

 or 

ALARM 2

 button to confirm and enter to next setting.

(NOTE: AM/PM indicator displays are located on the left side of the 

time.)

2. 

After setting the time, Use 

 or 

 control button and select the option for desired source for the alarm. Choose from iPod, USB, CD, AM / FM Radio or 

buzzer. For AM/FM radio sources, you need to select the desired preset station.

3. Press 

ALARM 1

 or 

ALARM 2

 button to pre-set the volume level when the Alarm(s) is (are) activated. Use  

 or 

 control button to adjust the volume 

level from 1 to 30. When the Alarm(s) is (are) activated, the volume will gradually rise from low to the pre-set setting.

4. Press 

the 

ALARM 1

 or 

ALARM 2

 buttons again to secure the setting and exit the alarm setting mode.

Notes: 

Make sure the alarm volume level set to desired level and the i199’s display has icon indicating alarm armed. 

Using the Alarm Function 

1. 

To preview the alarm setting, press Wake to Button and display will scroll through current alarm setting.