43
USER
At first control turning on, the display shows the flashing clock that increases by one
unit every minute. The oven cannot operate and the possible operations to release it
are: “Setting the clock” procedure through the [+] and [-] buttons or alternatively directly
turning on the oven which involves the acceptance of the current clock value whatever
it is. Detailed clock setting, timer, duration and end of cooking operations are indicated
in the respective para-graphs below. Through the various setting buttons ( , , )
you enter the display and changing mode (indicated by a flashing display), in which [+]
and [-] buttons are enabled to adjust the value shown on the display. This value is still
ac-cepted after 4 seconds from the last press of a button (the display remains lit). All
settings are can be cancelled by pressing keys and .
Simultaneously press buttons and
for 5’’ (the display flashes) and alter the time
using the keys [+] and [-]. The clock can only be set with the oven on stand-by.
The time display mode can be altered: during time setting by pressing the button for
4 seconds; with the [+] button you can choose the 24 hours or 12 hours AM/PM option.
Turn selector [S]. The display shows “On”. The light inside the oven comes on after two
seconds and the display shows the default temperature expected from the selected
cooking mode and the correspective resistive loads are activated: in the case of gas
functions the burner’s flame turns on automatically thanks to a particular electric com-
ponent which controls the flame. If, after 3 attempts (each attempt has a duration of
10’’ with a pause of 5’’ in between), the flame does not remain inserted, the system is
blocked, and the orange LED of the thermostat starts flashing. To reset the system just
turn off the oven turning the sel ector [S] back the selector to [0] (the display shows
“OFF”), and repeat the procedure.
The function does not interact with the loads, and is available regardless of the oven’s
status. Press the button : the bell symbol lights up and the display shows “0’ 00”. Set
the time with [+] and [-], up to a maximum of 180 minu- tes, after 4 seconds without any
increase or decrease the information is accepted, the bell remains on. By pressing the
button after changing the timer value it reverts to clock mode, having accepted the
just altered value. Upon expiry of the set time a buzzer sounds together with the symbol
flashing. To stop the buzzer and the flashing, simply press any button.
Turn the oven on. Select a cooking function from those available. With knob [T] select
the desired temperature. After 4 seconds after the last setting the oven operates for an
indefinite time and the selected temperature remains on the display.
Turn the oven on. Press button , the display shows “End”. Set the end of cooking time
with [+] and [-] buttons (the maximum cooking time is 10 hours). By pressing the button
after changing the duration value it reverts to clock mode, having accepted the just
altered value. After 4 seconds from the last setting the oven is on for the set time. Having
reached the programmed time you enter cooking finished mode.
Turn the oven on. Press button and select the cooking start time with [+] and [-] but-
tons. Press button , the display shows “End”. Set the end of cooking time with [+] and
[-] buttons. If no cooking time is selected, the oven remains in manual cooking mode
indefinitely. After 4 seconds from the last setting the oven is on up to the specified time.
You can always select a cooking function from those available and the temperature can
Appliance operation
Setting the clock
Turning the oven on and
off
Timer
Indefinite manual ope-
ration
Semi-automatic end of
cooking operation
Automatic operation
IINSTRUCTIONS FOR USE
– 5-button electronic programmer H3