9
USER
INSTRUCTIONS FOR USE
LIGHT SWITCH
lts function is to switch the light on and off.
TIMER BUTTON:
(Clock symbol). lts function is to enter the automatic switch off.
BUTTON 1:
ON/ OFF (turns on and off the engine). lt adjusts the motor to the first speed.
RECYCLING AIR 24 HOURS:
By pushing button “0/1” for 7 seconds, the recycling air pro-
gram will be switched on or off (for 24 hours alternating functioning: switched off for 20
minutes and on for 5 minutes in first speed).
BUTTON 2:
lt adjusts the motor at the second speed.
BUTTON 3:
lt adjusts the motor at the third speed.
BUTTON INTENSIVE FAN:
lt adjusts the motor at full speed for 5 minutes and after that, automaticalty returns to
the third speed.
TIMER FUNCTION:
By pressing the “TIMER” push button while the hood is working, the clock symbol will start
flashing.
Once the timer is set, the hood will continue working for about 10 minutes and then it
will automatically switch off. The timer can be switched off at any moment by pressing
its push button. In this case, the hood will continue working as previously set.
FILTERS ALARM:
When, being the motor off, the push-button panel starts blinking, it me-
ans that the carbon filters inside the hood must be replaced for its correct working. In
order to reset the push-button panel it is simply keep push button “TIMER” pressed unti!
the keys switch off.
0/1
2
3
0/1
2
3
0/1
2
3
0/1
2
3
0/1
2
3
0/1
2
3
WORKING PANEL
0/1
2
3
