24
INSTRUCTIONS FOR USE
– Use of the inductive electric plate
Clean the hob’s surfaces with a damp cloth.
A cooking area is turned on by turning the relative knob clockwise. On the hob’s display
the set power level (from 1 to 9) appears.
A cooking area is turned off by turning the relative knob anti-clockwise. On the hob’s
display a [0] appears for 3 seconds, after which it disappears from the display
The appliance switches off automatically when there are overheating or supply error
conditions.
Each cooking area is designed to work with specifi c pots for induction cooking with a
diameter just less than the diameter of the selected cooking area.
If the pot is unsuitable, the display shows the symbol for the area without a pot (U) and
the appliance will not operate. This prevents the switching on until a pan is placed on
the cooking area or until a suitable pot for induction is used. If you remove the pot
during operation, the area is switched off.
Pot recognition lasts 9 minutes, if after this time no suitable pot is used, the area is
switched off. The area’s display changes from “absent pot” to [-].
If the cooking area, when turned off, is still very hot, the display shows the symbol H.
The heat-up, or quick heat function, is available on each cooking area. This means
that for a well defi ned time, the cooking area operates at maximum power and at
the end of this time the power is automatically adjusted to the set level. The duration
is, in this case, according to the set power level. The heat-up function starts by turning
the knob anti-clockwise, from 0 up to its end [*] (Fig. 10). Once the control is turned left,
an [A] appears on the relative area’s display. After initiation a power level must be set
within 3 seconds by turning the knob clockwise for the cooking’s duration; if this does
not happen, the heat-up function is interrupted.
The key-lock function is useful where children are present. However, the presence of an
adult is advisable when the appliance is working.
Activating the Key-lock function, all cooking areas are off and cannot be accidentally
turned on. The Key-lock function is activated, with the knobs at 0, by rotating one of the
two induction area’s controls anticlockwise for 3 seconds. [L][L] appears on the display.
By repeating this operation the Key-lock function is deactivated. [0] appears on the
display.
If a control is turned with the key-lock on, [L][L] appears on the display.
First switching on
Switching on one
cooking area
Switching off a cooking
area
Automatic switching off
Cookware presence
recognition
Afterheat indication
“Heat-up” function
Key-lock function
*
Summary of Contents for MAJESTIC M09
Page 68: ......