ILVE X301ISL Series, Instruction Manual

33

The hood features a LED light that, in addition to offer 

a good lighting and a significant energy savings, is 

guaranteed to last about 10 times more than traditional 

lights. For replacement, contact us at 
customercare@eurolinx.com.au

Spare filters can be purchased from dealers or direct 

from the manufacturer.
Removal: detach the metal covers and rotate the 

carbon filters clockwise (Fig. 6) until release from of the 

motor.
Re-fit: position the new carbon filters and reverse the 

procedure. The hood should be cleaned with a soft 

damp cloth using neutral liquid detergents. Do not use 

solvents, petroleum products or abrasives.

If the supply cord is damaged, it must be replaced by 

the manufacturer, its service agent, or similarly qualified 

persons in order to avoid a hazard.

THE MANUFACTURER DOES NOT ACCEPT LIABILITY 

FOR ANY DAMAGE OR  INJURY CAUSED  IF  THE 

USER FAILS TO FOLLOW THE ABOVE INSTRUCTIONS 

REGARDING INSTALLATION, MAINTENANCE AND 

THE PROPER USE OF THE COOKER HOOD.

For  service or a copy of this manual contact us at 

customercare@eurolinx.com.au

6. WARNINGS

The present instruction manual is an integral part of the 

appliance itself, therefore it must be carefully kept and 

ALWAYS accompany it, even in case of its assignment 

to another owner or user or in case the cooker hood 

is moved to another installation plant. Any eventual 

adjustment to the electrical system, which may be 

necessary to install the cooker hood, must be carried 

out only by competent people. Any repair carried out 

by no competent people may cause damages. For any 

repair or needed technical action make reference to 

a Technical Assistance Center, which is authorized to 

carry out the replacement of the spare parts. Always 

make sure that all the electrical parts (lights, exhaustion 

unit) are disconnected when the appliance is not in use.
By storms take off the main switch of the house 

electrical system. The using of the cooker hood 

must not be other than the use of exhausting units 

for cooking damps on domestic kitchens. The 

manufacturer does not accept any liability for damages 

caused by people, animals or things, by installation and 

maintenance mistakes or by any illegitimate use.
Make sure that the voltage (V) and the frequency (Hz) 

ratings indicated on the plate inside the cooker hood 

correspond to the ones available in the installation 

place.
We remind that the use of products functioning with 

electrical energy implies the observance of some 

essential security rules, as follows:

• This equipment is not intended for people (children 

included) with reduced mental or motor capacities, 

with lack of experience or knowledge, unless they are 

supervised or unless a person responsible for their 

security, gives them instructions regarding the use of the 

equipment. Children must be supervised in order to be 

sure that they do not play with the equipment.
• Any cleaning action is forbidden if the appliance hasn’t 

been disconnected from the main power supply and if 

the main switch of the house electrical system is not off. If 

cleaning is not carried out according to these instructions, 

a fire may break out.
• Do not pull, take off or twist the cable coming out from 

the appliance, even though this has been disconnected 

from the main power supply.
• Do not sprinkle or throw any water directly on the 

appliance. 
• Do not stick any sharp tool inside the exhausting holes 

and into the air discharge.
• Do not take out the filters in order to reach the internal
sides of the appliance in case the main switch of the 

house electrical system is not off.
• Do not singe or flambé directly underneath the cooker 

hood. Take particular care when frying to ensure that the 

oil does not catch fire.