C O M M A N D R E F E R E N C E
GPIB Command Reference
48
LDC-3926339
C H A P T E R
4
The LASER:ENABle:EVEnt command sets the Laser Event Status Enable register. The bits in this
register determine which bits in the Laser Event Status register are summarized in the LDC-3926
Status Byte.
Parameters
An <nrf value> whose sum represents the bits which are enabled:
Notes
This register is read with the LASER:ENABle:EVEnt? query. The laser event status is monitored by
the LASER:EVEnt? query.
See the Status Reporting section of the LDC-3926 manual for more information regarding condition
reporting.
Examples
LASER:ENAB:EVENT 136-action: only the "Open Circuit Changed State" (128) and "Power Limit
Changed State" (8) events will be reported (in summarized form) to the LDC-3926's Status Byte.
The LASER:ENABle:EVEnt? query returns the contents of the Laser Event Status Enable register.
Parameters
None. The response is the sum of the following:
Notes
This register is set using the LASER:ENABle:EVEnt command. The laser event status can be
monitored by the LASER:EVEnt? query.
Examples
"LASER:ENAB:EVE?" -response: 256, means that the laser "Output Shorted Changed State" event
is the only event that will be reported to the LDC-3926 Status Byte.
LASER:ENABle:EVEnt
1 -
Current Limit changed state
256 -
Output Shorted changed state
2 -
Voltage Limit changed state
512 -
Output Changed Tolerance State
4 -
n/a
1024 -
Output On changed state
8 -
Power Limit changed state
2048 -
n/a
16 -
Interlock changed state
4096 -
n/a
32 -
n/a
8192 -
n/a
64 -
n/a
16384 -
n/a
128 -
Open Circuit changed state
32768 -
n/a
LASER:ENABle:EVEnt?
1 -
Current Limit changed state
256 -
Output Shorted changed state
2 -
Voltage Limit changed state
512 -
Output Changed Tolerance state
4 -
n/a
1024 -
Output On changed state
8 -
Power Limit changed state
2048 -
n/a
16 -
Interlock changed state
4096 -
n/a
32 -
n/a
8192 -
n/a
64 -
n/a
16384 -
n/a
128 -
Open Circuit changed state
32768 -
n/a
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
