Copyright©2005 ILY Enterprise, Inc. All rights reserved.
10
Function 2 Test will simulate the copying process. When the simulation completes, the discs will
remain blank.
Press ENT button to start the disc simulation.
If you use DVD rewriteable discs that contain data, the old
Data will be quickly erased before simulation.
The LCD will show the testing
Information as the following screen:
.
When the process is finished, the LCD will
show the message as the following screen:
Stopping the test halfway does not affect the DVD discs. However, if the DVD rewriteable discs
contain important data, the information may be erased.
4.3 Test&Copy
Function 3 Test & Copy is to test first and then actually copy.
Select Function 3. Put a source DVD into DVD-ROM
and blank DVD discs into the writers.
Press ENT to start simulation. LCD will show the
information as the following screen:
After the tests finishes, actual copying will begin
as the following screen shows:
When the entire process finishes, the LCD will
show the information as the following screen:
4.4 Verify
Function 4, Verify, examines whether the target DVDs can be read correctly after copying.
Press ENT button to verify. The LCD will show as
the following screen:
The LCD will show verification information as
the following screen:
When the verification process is finished, the LCD
will display the result as such:
2
.
Test
Testing-24X 0%
650
.
0MB 74
:
00
2
.
Test
OK: 03
3
.
Test & Copy
Testing-24X 0%
650
.
0MB 74
:
00
Copying-24X 0%
650
.
0MB 74
:
00
3
.
Test & Copy
OK: 03
4
.
Verify
Verify--24X 0%
650
.
0MB 74
:
00
4
.
Verify
OK
:
03
