Operation Manual
Page 31
D.3
The “Finger Removal” Function
D.3.1
Position of Document
The
Book
eye
®
4
scanner offers a helpful function which detects fingers at the margin of
books and eliminates them from the image. This is the “Finger Removal” function.
The following simple steps must be completed
to operate the scanner using the “Finger
Removal” function properly:
•
The book cradle can be set to either
“V” position or flat position.
•
Place the book as shown in Picture 16 on the book cradle.
Picture 16: Book at book cradle in flat position
Allow
a small distance between the book’s bottom side and the lower margin of the book
cradle.
Picture 17: Book at book
cradle opened in “V” position
•
The distance depends on the thickness of the book. The distance should be at least
half of the thickness of the book.
•
Align the book parallel to the horizontal red laser line.
•
Position the book binding at the lowest point of the book cradles, opened in "V"
position.
