Image Engineering
Seite
3
von
12
1 INTRODUCTION
Important information: Read the manual carefully before using this device.
Inappropriate utilization may cause damage to the device, to the DUT (device under test), and/or other
components of your setup.
Keep these instructions in a safe place and pass them on to any future user.
1.1 Conformity
We, Image Engineering GmbH & Co. KG, hereby declare that the iQ-Near Focus corresponds to the
essential requirements of the following EC directive:
•
Electromagnetic Compatibility - 2014/30/EU
•
RoHS 2 - 2011/65/EU
1.2 Intended use
iQ-Near Focus is used to focus the automatic focusing system of a camera to a defined, short distance
with high temporal accuracy. A high contrast, translucent checkerboard chart is used for this purpose.
A typical use of iQ-Near Focus is to measure the camera release time in conjunction with the LED-
Panel.
Note:
iQ-Near Focus is only suitable for indoor use.
1.3 User safety
1.3.1 Manual and safety instructions
Read the manual and user safety instructions carefully before switching on iQ-Near Focus for the first
time. The device must only be operated by instructed personnel.
1.3.2 Keep hands clear of moving parts
Moving parts can crush and cut. Keep Hands clear while operating the iQ-Near Focus. Do not operate
iQ-Near Focus with the safety cover removed.
DO NOT
reach into the safety cover or the chart window at any point during operation.
