Image Engineering
Seite
3
von
11
1 INTRODUCTION
Important information: Read the manual carefully before using the device.
Inappropriate utilization may cause damages to the device, to the DUT (device under test)
and/or other components of your setup.
Keep these instructions in a safe place and pass them to any future user.
1.1 Conformity
We, Image Engineering GmbH & Co. KG, hereby declare that the Vega corresponds to the
essential requirements of the following EC directive:
•
Electromagnetic Compatibility - 2014/30/EU
•
Photobiological safety of lamps and lamp systems - IEC 62471:2009
1.2 Intended Use
Vega is a high-intensity illuminator for transparent charts based on LED technology. It is
capable of flicker-generation with variable frequency and variable duty cycle. The device can be
controlled with the Vega Software and the optional Vega C++ API.
•
Only suitable for indoor use.
•
Place your system in a dry and constant tempered environment without any interfering
light.
•
The optimal ambient temperature range is 22 to 26 degrees Celsius. The maximum
ambient temperature range is 18 to 28 degrees Celsius.
•
The system has an internal temperature management system. If there is an error
regarding the internal temperature, the status LED will indicate an error, and the system
automatically turns off to avoid any damage.
1.3 General Safety Information
Do not
open the device without instructions from the Image Engineering support team and
when connected to the power supply.
1.3.1 Photosensitive Epilepsy
A small number of users with pre-existing conditions may experience seizures
while using the flicker mode of Vega. Certain frequency and intensity
combinations may trigger seizures with no prior medical history. Reframe from
using the device and consult a doctor immediately if you experience sickness
while using Vega.
1.3.2 Eye Safety
The LEDs used in this product can be classified as belonging to the exempt group or risk group
1 according to IEC 62471:2009.
