background image

Ordering Replacement Parts

Part No. 160861 R1299A                                       

Printed in China © 1999 Sears, Roebuck and Co.

Model No. 831.159700

QUESTIONS?

If you find that:

•  you need help assembling or

operating the IMAGE 3.8

•  a part is missing

•  or you need to schedule repair

service

call our toll-free HELPLINE

1-800-736-6879

Monday–Saturday, 7 am–7 pm
Central Time (excluding holidays)

REPLACEMENT
PARTS

If parts become worn and need to
be replaced, call the following toll-
free number

1-800-FON-PART 
(1-800-366-7278)

The model number and serial number of your IMAGE 3.8 are list-
ed on a decal attached to the frame. See the front cover of this
manual to find the location of the decal.

All replacement parts are available for immediate purchase or 
special order when you visit your nearest SEARS Service
Center. To request service or to order parts by telephone, call the
toll-free numbers listed at the left.

When requesting help or service, or ordering parts, please be
prepared to provide the following information:

•  The MODEL NUMBER of the product (831.159700)

•  The NAME of the product (IMAGE 3.8 Weight Bench)

•  The PART NUMBER of the PART (see the PART LIST and the

EXPLODED DRAWING at the center of this manual)

•  The DESCRIPTION of the PART (see the PART LIST and the

EXPLODED DRAWING at the center of this manual).

SEARS, ROEBUCK AND CO., HOFFMAN ESTATES, IL 60179

For 90 days from the date of purchase, if failure occurs due to defect in material or workmanship in this
SEARS WEIGHT BENCH EXERCISER, contact the nearest SEARS Service Center throughout the United
States and SEARS will repair or replace the WEIGHT BENCH EXERCISER, free of charge.

This warranty does not apply when the WEIGHT BENCH EXERCISER is used commercially or for rental
purposes.

This warranty gives you specific legal rights, and you may also have other rights which vary from state to
state.

SEARS, ROEBUCK AND CO., DEPT. 817WA, HOFFMAN ESTATES, IL 60179

Full 90 Day Warranty

Summary of Contents for 3.8



















Reviews: