background image

3

1. Read all instructions in this manual before

using the weight bench. Use the weight
bench only as described in this manual.

2. It is the responsibility of the owner to ensure

that all users of the weight bench are ade-
quately informed of all precautions.

3. The weight bench is intended for home use

only. Do not use the weight bench in a com-
mercial, rental or institutional setting.

4. Use the weight bench only on a level surface.

Cover the floor beneath the weight bench for
protection.

5. Inspect and tighten all parts each time you

use the weight bench. Replace any worn
parts immediately.

6. Keep children under 12 and pets away from

the weight bench at all times.

7. Keep hands and feet away from moving

parts.

8. Always wear athletic shoes for foot protec-

tion while exercising.

9. Always make sure there is an equal amount

of weight (not included) on each side of the
barbell.

10. If you feel pain or dizziness at any time while

exercising, stop immediately and begin cool-
ing down.

11. The weight bench is designed to support a

maximum of 560 pounds, including the user,
a barbell and weights (not included). Do not
place more than 310 pounds, including the

barbell, on the weight gliders and safety
spotters.

12. Always set both safety spotters at the same

height.

13. Always secure your weights (not included)

with weight clips when they are mounted on
the barbell.

14. Always move the bench out of the way when

performing an exercise that does not use the
bench.

15. The decals shown below have been placed

on the weight bench. If a decal is missing or
illegible, please call our toll-free HELPLINE at
1-800-736-6879, Monday through Saturday, 7
a.m. until 7 p.m. Central Time, to order a free
replacement decal. Apply the decal in the
location shown.

WARNING: Before beginning this or any exercise program, consult your physician. This is especially
important for persons over the age of 35 or persons with pre-existing health problems. Read all
instructions before using. SEARS assumes no responsibility for personal injury or property damage
sustained by or through the use of this product.

WARNING: To reduce the risk of serious injury, read the following important precautions before
using the weight bench.

Important Precautions

Summary of Contents for 3.8



















Reviews: