background image

5

Thank you for selecting the IMAGE

¨

RENEW 815. The

innovative RENEW 815 offers the features and quality
of a traditional hot tub at an affordable price. Best of
all, the RENEW 815 is fully portable, so you can take
it wherever there is an electrical outlet. The RENEW
815 allows you to relax and unwind in the comfort of
your own home.         

For your benefit, read this manual carefully before
using the IMAGE

¨

RENEW 815. 

If you have addition-

al questions, please call our Customer Service

Department toll-free at 1-800-999-3756, Monday
through Friday, 6 a.m. until 6 p.m. Mountain Time
(excluding holidays). To help us assist you, please
note the product model number and serial number
before calling. The model number is IMHS81592. The
serial number can be found on a decal attached to spa
jet unit (see the front cover of this manual).

Before reading further, please familiarize yourself with
the parts that are labeled in the drawing below.

Dry Side
Jet Pack

Wood Surround
Note: When the
spa is filled with
water, the Wood
Surround may bow
slightly; this is a
normal condition.

Locking Buckle

Console

Spa Cover

Power Cord

Ground Fault Circuit

Interrupter (GFCI)

Wet Side
Jet Pack

Jets

Filter

Pillow

Locking Buckle

This section

fits the Dry

Side Jet Pack

Before You Begin

Summary of Contents for 815inflatable




















Reviews: