background image

Thank you for selecting the IMAGE

®

FREESTRIDE

16.0 treadmill. The FREESTRIDE 16.0 treadmill com-
bines advanced technology with innovative design to
let you enjoy an excellent form of cardiovascular exer-
cise in the convenience and privacy of your home. And
when you’re not exercising, the unique FREESTRIDE
16.0 treadmill can be folded up, requiring less than half
the floor space of other treadmills.

For your benefit, read this manual carefully before
you use the treadmill.

If you have questions after

reading this manual, please see the front cover of this
manual. To help us assist you, note the product model

number and serial number before contacting us. The
model number of the treadmill is IMTL41205.0. The se-
rial number can be found on a decal attached to the
treadmill (see the front cover of this manual for the lo-
cation). 

To avoid a registration fee for any service needed
under warranty, you must register the treadmill at
www.iconservice.com/registration.

Before reading further, please review the drawing
below and familiarize yourself with the labeled parts.

BEFORE YOU BEGIN

4

Handrail

Upright

Storage Latch

Key/Clip

Reset/Off

Circuit Breaker

Walking Belt

Cushioned Walking Platform

for maximum exercise comfort

Foot Rail

Power Cord

BACK

RIGHT SIDE

Rear Roller  
Adjustment Bolts

Console

Bookrack

Water Bottle Holder
(No bottle is included) 

Incline Leg

Summary of Contents for Freestride 16.0 Treadmill




















Reviews: