background image

4

motor of this unit to connect a minimum No.
8 AWG (804 mm

2

) solid copper conductor

between this unit and any metal equipment,
electrical enclosure made of metal, metal
water pipes, or conduit within five feet
(1.52m) of the unit.

22. DANGERÑRisk of electric shock: Do not set

up the hydrotherapy spa within five feet of
any metal objects or surfaces. As an alterna-
tive, you may use the spa within five feet of
metal objects if each metal object is perma-
nently connected to the wire connector on
the pump motor of this unit by a minimum
No. 8 AWG (804 mm

2

) solid copper conductor

(see instruction 21). 

23. DANGERÑRisk of drowning: Exercise

extreme caution to prevent unauthorized and
unsupervised use of the hydrotherapy spa by
children. Children must always be super-
vised.

24. DANGERÑTo reduce the risk of drowning:

¥ Never use the spa alone;
¥ Children should not use the spa unless

they are supervised by an adult;

¥ Keep pets away from the spa at all times;
¥ Always replace and lock the spa cover

when the spa is not in use. 

25. WARNINGÑTo reduce the risk of injury: The

water temperature should never exceed
104¡F (40¡C). Temperatures between 100¡F
(38¡C) and 104¡F (40¡C) are considered to be
safe for healthy adults. However, if you plan
to remain in the hydrotherapy spa for more
than 10 to 15 minutes, a lower temperature is
recommended. Lower temperatures are also
recommended for children. 

26. WARNINGÑTo reduce the risk of injury:

Always use an accurate thermometer to
determine the water temperature before
using the hydrotherapy spa.

27. WARNINGÑTo reduce the risk of injury:

Pregnant women should consult with their
physician before using the hydrotherapy spa.
Pregnant women should not use the spa if
the water temperature is above 100¡F (38¡C);

the unborn child could be seriously harmed. 

28. DANGERÑTo reduce the risk of drowning:

Prolonged immersion in the hydrotherapy
spa may cause hyperthermia, a dangerous
condition which occurs when the internal
body temperature rises several degrees
above the normal body temperature of 98.6¡F.
The symptoms of hyperthermia are nausea,
dizziness, drowsiness, and fainting. Effects
include: a lack of awareness, inability to per-
ceive heat or danger, and a greater risk of
drowning due to a loss of consciousness.

Special note: Individuals suffering from
hyperthermia may be unable to realize that
they must exit the spa, and they also may be
physically unable to do so.

29. WARNINGÑTo reduce the risk of drowning:

Heat from the water, in conjunction with alco-
hol or drugs can cause unconsciousness. 

Do

not use the hydrotherapy spa if you are
under the influence of drugs or alcohol.

30. WARNINGÑTo reduce the risk of injury or

drowning: Consult your physician about pos-
sible side-effects of any medications you may
be taking before using the hydrotherapy spa.
Heat from the water, in conjunction with some
medications may cause drowsiness and
increase the risk of drowning. Others can
effect blood pressure, heart rate, and circula-
tion.

31. WARNINGÑTo reduce the risk of injury: It is

especially important for persons over the age
of 35 or persons with pre-existing health
problems, such as obesity, heart disease,
high or low blood pressure, circulatory prob-
lems, or diabetes to consult your physician
before using this product. 

32.  If you feel pain or dizziness at any time while

using the hydrotherapy spa, discontinue use
and contact a physician.

33. WARNINGÑThe spa jets produce a stream of

water with relatively high pressure.
Prolonged exposure of a localized area of the
body may cause bruises to the skin.

WARNING: Read all instructions before using the hydrotherapy spa. ICON assumes no responsibility
for personal injury or property damage sustained by or through the use of this product. 

SAVE THESE INSTRUCTIONS

Summary of Contents for IMHS80081


















Reviews: