Shell+ 12 Wall Mounted Tablet Enclosure
Instructions
+44 (0) 1202 892 863 |
1-888-858-9778 |
sales
@imageholders.com
Unit B8, Arena Business Centre, Nimrod Way, Wimborne, Dorset. BH21 7UH.
©
image
HOLDERS
Ltd. All rights reserved
017_12_161
Applicable To:
C
Enclosure and Tablet Fitting
Installation Complete
C7 - Visual Check
C6 - Install Conduit
C5 - Lock Your Enclosure
C4 - Fitting the Tablet Cassette
Position
C
back into
A
just
above centre to locate and push
down to secure location.
Tip: ensure excess cable
is stored within
A
, and not
trapped between
C
and
A
.
Tip: Use cable conduit for
security and aesthetics.
Turn your power
supply on at the mains.
Push in the Push Locks
to secure your tablet in
the enclosure.
With your
Tablet installed
and connected.
Your Wall Mounted Shell+ Tablet
Enclosure is ready for use.
Your Enclosure and cabling
should look like this from the
side.
