Slimline Wall Mounted Tablet Enclosure
Range Instructions
B/C
Standard Tablet Loading and Cabling
S Additional Device Fitting
C2 - Device Fitting and Power
C1 - S Device Fitting
B3 - Cassette Loading
B2 - Standard Power Cabling
B1 - Tablet Loading
Thumb
Screws
Lift the Tablet Tray (
B
) out of the
Cassette (
C
)
Turn on your Tablet
and place it in the
Tablet Tray (
B
)
Slide the Tablet Tray (
B
) back into the
Cassette (
C
)
With the tablet fitted, plug in your tablet’s power cable.
[
Location may vary from the options shown above
]
Position
C
into
A
, just above centre to locate.
Push down to fully close.
Remove highlighted thumb screws to release the
Device Tray.
Connect your power supply to your tablet, fit the NFC reader to
the top of the Device Tray and connect the device to your tablet.
