imageHOLDERS SlimLine 10 Plus Instructions For Use Download

Page: 4 / 4

Slimline Wall Mounted Tablet Enclosure
Range Instructions

172mm

70mm

20mm

RFID USB

USB

HUB

To Tablet

To Power

To Tablet

USB

HUB

Card Reader

Mounted on the Bezel

To Power

To Tablet

Example Device Tray Configurations

Make Your Own Configuration

Configuration 3 - NFC Reader

Configuration 2 - Card Swipe

Configuration 1 - NFC Reader

Tablet:
- Samsung Galaxy Tab A

Devices:
- Lava Link USB Hub
- Magtek Dynamag

Tablet:
- Linx 10-10

Devices:
- ACS ACR122U

Tablet:
- Samsung Galaxy Tab A

Devices:
- Lava Link USB Hub
- ACS ACR122T

Other configurations are available, use the below dimensions as
a guide to what can be fitted and discuss your requirements with
our team

Summary of Contents for SlimLine 10 Plus

Page 1: ...of the 7 screw holes as shown Depending on your chosen surface it may be easier to Mark the centre of the holes with a pencil H Drill pilot holes and install raw plugs if required A3 Enclosure Mountin...

Page 2: ...out of the Cassette C Turn on your Tablet and place it in the Tablet Tray B Slide the Tablet Tray B back into the Cassette C With the tablet fitted plug in your tablet s power cable Location may vary...

Page 3: ...the thumb screws Stowe excess cable in the remaining space of the device tray and ensure no cables interfere with the tray locating pins circled Lock the Enclosure by pushing in the Push Lock Pins Ti...

Page 4: ...ake Your Own Configuration Configuration 3 NFC Reader Configuration 2 Card Swipe Configuration 1 NFC Reader Tablet Samsung Galaxy Tab A Devices Lava Link USB Hub Magtek Dynamag Tablet Linx 10 10 Devic...