Page 18
Glass Plate Setup and Assembly Manual
Locate the section
Updates and Uploads
and go to Install Options . All option keys
displayed in green are valid and installed. A new key must be entered completely, without
blanks or spaces followed by pressing the Apply button. If the key displayed does not
turn green, the key is invalid or does not belong to this specific scanner or option.
Note:
Option keys are valid only for one option on a specific scanner denoted by its
serial number. If a key is accidentally deleted it can always be obtained again
at the Image Access service portal
http://service.imageaccess.de
at no
additional cost.
Picture 20: “Install Option” screen
If the option
Manual Glass Plate
is shown in red color, the option is not active.
Insert the authorization key into the appropriate field and choose
Yes
in the lower drop
down box to confirm the change of the option list. Finally, press the Apply button to
activate the option.
After a successful activation, the option
Manual Glass Plate
is shown in green color.
