Selenio
TM
BNP User Guide, Release 3.7.1
227
- DVB-CA Configuration
2.
From the right side of the window, expand the GigE or ASI port in which you created the original
DVB TS (See “Creating Output DVB TS(s) for DVB-CA System” on page 213.)
3.
Highlight the TS and click the left arrow button (<<) next to the port list.
4.
The TS is now added to the left side of the window with a PID value of 0 (
), which you will
need to change.
Figure 161. Join/Disjoin TS - TS added to EMM - No PID
5.
Edit the PID value:
-
Click on the TS displayed in the left panel of the window to activate the
PID:
field at the
bottom of the screen.
-
At the
PID
: field, type a PID value for this TS. The PID value may be any valid PID
or
Leave the
PID
value as 0 to automatically generate a default PID for the entry.
Figure 162. Join/Disjoin TS - PID entry
PID not yet modified
6.
Tap the <
Enter
> key to set the specified value into the
Pid
column at the top of the window (as
demonstrated in
