Selenio
TM
BNP User Guide, Release 3.7.1
231
- DVB-CA Configuration
Figure 167. Access Criteria List - Show Total ACs
Step 2 Create SCG
The conventions described in
are applicable for creation of an SCG, as based on whether the
DVB-CA system uses an external or internal EIS server.
Table 97.
EIS Servers and SCG Creation
EIS Server Type
SCG Creation
External
An SCG is automatically created for every program to be encrypted. In this case, you
can only display the SCG for external EIS mode. You cannot create the SCG for
external EIS mode.
Internal
An SCG must be manually created. An SCG must be created for every program
to be encrypted.
Repeat the following steps for every program to be encrypted.
1.
From the
SCG
tab page, right-click on the
SCG Group
folder and select
Create SCG
from the pop-up menu.
The
Create SCG
dialog is now in view.
2.
Use the Create SCG dialog to define parameters for
the SCG to be included in the selected group.
Use guidelines from
(below) with this dialog.
3.
Click
Apply
to save the settings displayed in this
dialog, dismiss this dialog, and to create the SCG
4.
At the
SCG
tab page, check to ensure that the new
SCG is listed in the expanded SCG Group.
.
Table 98.
Create SCG dialog - Internal EIS mode parameters
Field
Description
SCG ID
Specify a unique number that will identify an SCG within the system.
Range is 1 to 65534; default is blank.
Transport Stream
Use the Select TS button to select the TS under which the desired
programs are to be encrypted.
This TS
must
be a DVB TS.
See “Creating Output DVB TS(s) for DVB-CA System” on page 213.
