Selenio
TM
BNP User Guide, Release 3.7.1
123
- Grooming - Mapping
Creating an SCTE Output Transport Stream on a GigE Port
Go to the SCTE version of the
Create Output Transport Stream
dialog (
Menu Path
From the
Outputs panel
of the
Grooming
tab
-> Mapping
tab screen, right-click on a GigE port
and select
Create Transport Stream
from the popup menu. At the
Create Output Transport
Stream
dialog
TS Type
field, select
SCTE
.
Figure 71.
Create Output Transport Stream (GigE)—SCTE
1.
At the
Create Output Transport Stream
to provide port
information in the remaining fields.
2.
Click
OK
to save your settings and to place the new SCTE transport stream in the
Outputs
panel of
the
Grooming
->
Mapping
tab screen, beneath the selected GigE port.
Creating DVB Output Transport Streams
Use the
Create Output Transport Stream
screen to set parameters for Digital Video Broadcast (DVB)
transport streams, as described in the following topics:
•
“Creating a DVB Output Transport Stream on a GigE Port,” next.
•
“Creating a DVB Output Transport Stream on an ASI Port” on page 124.
Creating a DVB Output Transport Stream on a GigE Port
Go to the DVB version of the
Create Output Transport Stream
dialog (
Menu Path
From the
Outputs panel
of the
Grooming
tab
-> Mapping
tab screen, right-click on a
GigE port and select
Create Transport Stream
from the popup menu. At the
Create
Output Transport Stream
dialog
TS Type
field, select
DVB
.
